Model 44SSFH Power Meat Saw
The BIRO Model 44SSFH (Stainless Steel/Fixed Head) Power Meat Saw equipped with a 142” (3606.8 mm) Saw Blade is a heavy-duty, high-volume bandsaw that is well-suited for continuous intensive operation. The 3HP industrial motor, at 4000 feet per minute as standard blade speed, provides you with plenty of power and efficiency. BIRO’s unique EZ-Flow meat carriage with 8 Stainless Steel Bearings helps reduce operator fatigue and increase productivity. The watertight magnetic electrical controller helps ensure safe, reliable operation. The 18” (457mm) diameter saw blade wheels with a 17-5/32” (435.8mm) horizontal cutting clearance and a full 17-1/8” (435mm) vertical cutting clearance lets you cut larger product pieces than other saws. A broad range of designs, configurations, and options give you the flexibility to own a saw that fits your exact needs. The BIRO Model 44SSFH Series Power Meat Saws have superior durability and engineering features you’ve come to expect from BIRO, which means you’ll get years of reliable use, low maintenance, and minimal overall cost of ownership.
44SSFH (Stainless Steel/ Fixed Head) Power Meat Cutter
DP = Drip Proof EC = Extra Cost MR = Moisture Resistant STD = Standard
Two saw blades, operation and parts manual, safety wall poster, end cut safety pusher plate.
Watertight magnetic with thermal overload and under voltage protection.
Head and Door
Stainless steel fixed head, removable head door.
Hard tooth, three teeth per inch (8.5 mm between teeth), 142” (3606.8 mm) long x 5/8” (16 mm) wide, .022” (.56 mm) thick (two supplied with each saw).
Std. 4000 feet (1219 m) per minute approx. Higher blade speed available depending on product to be cut.
Blade Back-up Guides
Upper and lower blade backup guides, (both with long life carbide back-up inserts). Both assemblies removable for easy cleaning.
18” (457 mm) cast iron, chrome nickel plating, upper wheel assembly lifts out.
Heavy duty tapered roller bearings used in upper wheel and lower bearing housings.
Poly, extra deep (rounded corners) pan sealed off from other parts of base, accessible through base hinged door.
All models 44SSFH accept 142” (3606.8 mm) blade.
Stainless steel body, long life carbide guide insert, stainless steel saw cleaners, removable as a unit for easy cleaning (assembly also adjustable as a unit).
Non slip silent v-belt, tension adjustable.
Four stainless steel leg bolt levelers.
Stainless steel EZ-flow movement with eight stainless steel bearings.
Meat Gauge Plate
Stainless steel faced, adjustable from 1/16” (1.59 mm) to 6-1/2” (165 mm) locks in position, can be disengaged, entire assembly removable for cleaning.
Sealed off from meat contact areas, easily accessible through removable panel door.
Stainless steel, held in place with two push pull hold down stainless steel rods.
Safety End Cut Pusher Plate
Standard, removable pusher plate, storage hanger provided.
U.S.D.A., U.L., N.S.F., C.F.I.A. (C.S.A., STD., DP, 3HP-230-60-3)
Weight Standard Configuration
See drawing A. Uncrated: 600 lbs. (272 kg.) approximate. Crated: 700 lbs (318 kg.) approximate.
Dims. Standard Configuration Crated
See drawing A L = 54”(137 cm), W = 45”(114 cm), H = 83”(211 cm).
Note: Weights and dims. of other designs will vary depending on the design and options selected.
|See dimensional drawings to the right.||A||B||C||D||E||F||G||H|
|Power cord (12 Gauge) and plug- specify cord length- Required||EC||EC||EC||EC||EC||EC||EC||EC|
|Double movable saw guide bar, recommended on E & F||EC||EC||EC||EC||REC, EC||REC, EC||EC||EC|
|Stainless Steel saw blade wheels – (IPOS)||EC||EC||EC||EC||EC||EC||EC||EC|
|Double flange cast saw blade wheels – (IPOS)||EC||EC||EC||EC||NC||NC||EC||EC|
|1” (25.4 mm) cast saw blade wheels – (IPOS)||EC||EC||EC||EC||NC||NC||EC||EC|
|Accepts 1” (25.4 mm) wide saw blade||EC||EC||EC||EC||EC||EC||EC||EC|
|Longer SS hex adjustable legs – 2” (51 mm) increments||EC||EC||EC||EC||EC||EC||EC||EC|
|Left hand feed (Left to Right) available for all listed designs||EC||EC||EC||EC||EC||EC||EC||EC|
|Narrow upper and table guides for .018 (.046 cm) thick saw blades – (IPOS)||EC||EC||NR||NR||REC, EC||REC, EC||NR||NR|
|Legend: SS = Stainless Steel STD = Standard EC = Extra Cost REC = Recommended NC = No Charge|
|NR = Not Recommended IPOS = In Place of Standard; All specifications contained herein are subject to change without notification.|