Model 11- 10 inch Power Cutter
BIRO’s Model 11, 10” Power Cutter is equipped with a 1-1⁄2 HP motor and toggle switch as standard. A powder coated steel base, with aluminum head and door structures are standard. The removable platter and meat carriage are stainless steel.
Designed for use in small delis, meat shops, small grocery stores and restaurants. Excellent for boneless meats, chicken and pork chop cutting.
Proven design concepts with the durability and reliability found on other BIRO Power Cutters. Strong load bearing components. BIRO’s single flange wheel concepts protect the blades set and teeth. Disassembles for easy cleaning without tools and is economical to use.
SPECIFICATIONS
MODEL
11 POWER CUTTER (10”).
CONSTRUCTION
STEEL PLATE POWDER COATED BASE, ALUMINUM HEAD.
MOTORS
| HP | KW | TYPE | VOLTS | AMPS | CYCLE | PH | STATUS |
|---|---|---|---|---|---|---|---|
| 1 1/2 | 1.1 | HH | 115/208-230 | 21/11/10.5 | 60 | 1 | STD |
| 1 1/2 | 1.1 | HH | 208-220/440 | 6-5.6/2.8 | 60 | 3 | STD |
| 1 1/2 | 1.1 | HH | 115/208-230 | 20/10-11 | 50 | 1 | EC |
| 1 1/2 | 1.1 | TE | 115/208-230 | 20/10-11 | 60 | 1 | EC |
| 1 1/2 | 1.1 | TE | 208-220/440 | 6-5.6/2.8 | 60 | 3 | EC |
| 1 1/2 | 1.1 | HH | 220/380/415 | 6/3.6-3.2 | 50 | 3 | STD |
| 1 1/2 | 1.1 | TE | 220/380/415 | 6/3.6-3.2 | 50 | 3 | EC |
TE=TOTALLY ENCLOSED STD=STANDARD HH=HIGH HUMIDITY EC=EXTRA COST
STANDARD FEATURES
ONE SAW BLADE, OPERATION AND SAFETY MANUAL, SAFETY
WALL POSTER, END CUT SAFETY PUSHER PLATE.
SWITCH
TOGGLE, STANDARD, 2 HP RATED, PLACED CONVENIENTLY IN FRONT.
HEAD AND DOOR
ALUMINUM, ENTIRE ASSEMBLY REMOVABLE.
BASE STRUCTURE
STEEL PLATE, WELDED POWDER COATED.
BLADE STANDARD
HARD TOOTH .020 INCH (.4 MM) THICK, FOUR TEETH PER INCH, 5/8 INCH (16 MM) WIDE, 78” (1981 MM) LONG, ONE SUPPLIED WITH EACH SAW.
BLADE SPEED
3000 FEET (914 M) PER MINUTE APPROXIMATE, FOR BOTH 50 AND 60 CYCLE OPERATION.
BLADE GUIDE
UPPER AND LOWER BLADE BACKUP GUIDE ASSEMBLIES, REMOVABLE WITH LONG LIFE CARBIDE BACKUP INSERTS.
BLADE TENSION
RATCHET ARM AND CAM AGAINST POUND TESTED SPRING AND TENSION SPRING GAUGE.
BLADE WHEELS
10” (25.4 CM) CAST IRON, CHROME NICKEL PLATING, UPPER WHEEL ASSEMBLY LIFTS OUT.
BEARINGS
HEAVY DUTY TAPERED ROLLER BEARINGS IN UPPER WHEEL AND LOWER BEARING HOUSINGS.
CATCH PAN
POLY, EXTRA DEEP, ROUNDED CORNERS, SEALED OFF FROM OTHER PARTS OF BASE, ACCESSIBLE THROUGH BASE HINGED DOOR.
CLEANING UNIT
LONG LIFE CARBIDE GUIDES, STEEL SAW CLEANERS, REMOVABLE AS A UNIT FOR EASY CLEANING, (ASSEMBLY ALSO ADJUSTABLE AS A UNIT).
DRIVE SYSTEM
NON-SLIP SILENT V-BELT, TENSION ADJUSTABLE.
LEGS
STRAIGHT, NON ADJUSTABLE.
MEAT CARRIAGE
STAINLESS STEEL WITH NYLON GUIDES AND STEEL BEARINGS.
MEAT GAUGE PLATE
STAINLESS STEEL FACED, ADJUSTABLE FROM 1/16” (1.59 MM) TO 6-1/2” (165 MM), LOCKS IN POSITION, CAN BE THROWN OUT OF GEAR, ENTIRE ASSEMBLY REMOVABLE FOR CLEANING.
MOTOR COMPARTMENT
SEALED OFF FROM MEAT CONTACT AREAS, EASILY ACCESSIBLE THROUGH REMOVABLE PANEL DOOR.
PLATTER
ALL STAINLESS STEEL, HELD IN PLACE WITH TWO PUSH PULL HOLD DOWN STAINLESS STEEL RODS.
SAFETY END CUT
PUSHER PLATE
STANDARD, REMOVABLE.
OPTIONS (EC)
POWER CORD AND PLUG, TOTALLY ENCLOSED MOTOR, WATERTIGHT MAGNETIC SWITCH WITH THERMAL OVERLOAD AND UNDER VOLTAGE PROTECTION, NSF CERTIFICATION.
CERTIFICATION
C.S.A. 115-60-1, U.L. NOTE: IF NSF IS REQUIRED, MUST SPECIFY, EXTRA COST FOR NSF REQUIREMENTS.
WEIGHT
UNCRATED: 256 LBS. (116 KG) APPROXIMATE. CRATED: 298 LBS. (135 KG) APPROXIMATE.
DIMENSIONS CRATED
L = 32” (81.3 CM), W = 40” (101.6 CM), H = 38-1/2” (97.8 CM).
Item Number
LIT-11-007
