Model 3334SS-4003
The BIRO Model 3334-4003 Meat Saw is the saw of choice for high volume production of retail cuts such as porterhouse steaks and pork chops. Its extra large tables give you more room for heavy production, and the exclusive BIRO EZ-Flow front carriage moves easily and smoothly to ease long hours of meat cutting and enhance safety. The 3 hp, (2.2 kW) motor provides all the power you need, and the 4000 feet (1219 meters) per minute cutting speed makes the blade cut through even dense beef bones with ease. The 3334-4003′s stainless steel base, cast aluminum head, watertight magnetic switch, and totally enclosed motor stand up to heavy use and daily washdown, so you get years of productivity out of your saw. Its heavy duty construction, including a tapered roller bearing drive system and stainless steel construction means fewer repairs and lower repair bills, both of which improve your bottom line. Day after day, the BIRO 3334-4003 Meat Saw works harder so you don’t have to.
SPECIFICATIONS
MODEL
3334SS-4003
CONSTRUCTION
UNITIZED STAINLESS STEEL BASE, TABLES, LEG BOLT LEVELERS, CARRIAGE CHANNEL & SUPPORTS, ALUMINUM HEAD AND DOOR REMOVABLE
MOTORS
| HP | KW | TYPE | VOLTS | AMPS | CYCLE | PH | STATUS |
|---|---|---|---|---|---|---|---|
| 3 | 2.2 | TE | 208-220/440 | 9.1-8.6/4.3 | 60 | 3 | STD |
| 3 | 2.2 | TE | 220/380-415 | 8.1/5.8-4.3 | 50 | 3 | STD |
| 3 | 2.2 | TE | 208-230 | 15.5-14 | 60 | 1 | EC |
| 3 | 2.2 | TE | 220-440 | 12.5-11.5 | 50 | 1 | EC |
| 3 | 2.2 | TE | 550 | 3.6 | 60 | 3 | EC |
| 5 | 3.7 | TE WP | 208-220/440 | 14.4-13.6/6.8 | 50/60 | 3 | EC |
| 5 | 3.7 | TE WP | 380-415 | 7.9-7.2 | 50 | 3 | EC |
STD=Standard EC=Extra Cost TEFC=Totally Enclosed Fan Cooled WP=Water Proof HH=High Humidity
STANDARD EQUIPMENT
TWO SAW BLADES, OPERATION AND SAFETY MANUAL, SAFETY WALL POSTER, AND END CUT SAFETY PUSHER PLATE
SWITCH
WATERTIGHT MAGNETIC, THERMAL OVERLOAD, UNDER VOLTAGE PROTECTION
HEAD AND DOOR
ALUMINUM (RATCHET ARM BLADE TENSION)
BASE STRUCTURE
STAINLESS STEEL
BLADE STANDARD
124” (3150 MM) LENGTH X 5/8” (16 MM) WIDE X .022 (.5 MM) THICK, 3 TEETH PER INCH (8.5 MM BETWEEN TEETH, HARD TOOTH (TWO SUPPLIED WITH EACH SAW)
BLADE SPEED
4000 (1219 M) FEET PER MINUTE
BLADE GUIDE
UPPER AND LOWER BLADE BACKUP GUIDE ASSEMBLIES, REMOVABLE, WITH LONG LIFE CARBIDE BACKUP INSERTS
BLADE TENSION
RATCHET ARM AND CAM AGAINST POUND TESTED SPRING AND TENSION SPRING GAUGE
BLADE WHEELS
16” (40.24 CM) CAST IRON CHROME NICKEL PLATING, UPPER ASSEMBLY LIFTS OUT
BEARINGS
HEAVY DUTY TAPERED ROLLER BEARINGS USED IN UPPER WHEEL AND LOWER BEARING HOUSING
CATCH PAN
POLY, EXTRA DEEP, ROUNDED CORNERS, PAN SEALED OFF FROM OTHER PARTS OF BASE, ACCESSIBLE THROUGH BASE HINGED DOOR
CLEANING UNIT
STAINLESS STEEL BODY, LONG-LIFE CARBIDE GUIDES, STEEL SAW CLEANERS, REMOVABLE AS A UNIT FOR EASY CLEANING (ASSEMBLY ALSO ADJUSTABLE AS A UNIT)
DRIVE SYSTEM
NON SLIP SILENT V-BELT, TENSION ADJUSTABLE
LEGS
STAINLESS STEEL LEG BOLT LEVELERS
MEAT CARRIAGE
LARGER STAINLESS STEEL E-Z FLOW 8 BEARINGS CARRIAGE, 18″(457.2MM)WIDE X 25-9/16″(649.3MM) LONG
MEAT GAUGE PLATE
STAINLESS STEEL FACED, ADJUSTABLE FROM 1/16” (1.6 MM) TO 6-1/2” (106.1 MM), LOCKS IN POSITION, EASY TO ADJUST, ENTIRE ASSEMBLY REMOVABLE FOR CLEANING
MOTOR COMPARTMENT
SEALED OFF FROM MEAT CONTACT AREAS, EASILY ACCESSIBLE THROUGH REMOVABLE PANEL DOOR
PLATTER
ALL STAINLESS STEEL, HELD IN PLACE WITH TWO PUSH PULL HOLD DOWN STAINLESS STEEL RODS
SAFETY END CUT PUSHER PLATE
STANDARD, REMOVABLE
OPTIONS (EC)
WATER JET, LOWER REMOVABLE SAW WHEEL, STAINLESS STEEL HEAD AND DOOR (MOVABLE), DOUBLE SAW GUIDE BAR, LEFT HAND FEED WITH S.S. HEAD, LOW PROFILE S.S. HEAD STRUCTURE, POWER CORD AND PLUG, DOUBLE FLANGE BLADE WHEELS, DOUBLE FLANGE BLADE WHEELS (LOWER REMOVABLE), NARROW GUIDES (CHECK FACTORY), STATIONARY FRONT TABLE, STAINLESS STEEL WHEELS, SPLIT PLATTER, FAST BLADE CHANGE
OPTIONS (NC)
HIGHER FEET PER MINUTE SPEED (CALL FACTORY)
CERTIFICATION
U.L., N.S.F., U.S.D.A., C.S.A., C.F.I.A.
WEIGHT
UNCRATED: 510 LBS. (231 KG) CRATED: 564 LBS. (256 KG)
Item Number
LIT 3334SERIES-334
