3334SS-4003FH (fixed head)

The Biro 3334SS-4003FH Fixed Head Meat and Fish Saw has what you need for high volume production of retail cuts. The rigid fixed stainless steel head provides vibration free operation at higher blade speeds. This lets you use a narrow blade which helps you minimize product waste, operator fatigue, and maximize productivity and profit. Like all Biro saws, the 3334SS-4003FH has heavy duty stainless steel construction and a roller bearing drive system, a design that has proven over the years to be more durable with lower maintenance. Your saw will have longer bearing life at the higher blade speeds, and it will easily withstand the heavy use typical of meat and fish plants. We also offer such attractive options as a split platter for quick blade changes, double flange wheels, a removable lower wheel, and stainless steel wheels.

SPECIFICATIONS

MODEL

3334SS-4003FH Fixed Head Power Saw

CONSTRUCTION

Heavy duty stainless steel base, legs, fixed head and door structures.

MOTORS

HP KW TYPE VOLTS AMPS CYCLE PH STATUS
3 2.2 TE 208/22/440 8.2/7.8/3.9 60 3 STD
3 2.2 TE 220/380/415 8.6/5.0/4.6 50 3 STD
3 2.2 TE 208/230 18.6/16.8 60 1 EC
3 2.2 TE 220 12.5 50 1 EC
3 2.2 TE 550 3.6 50 3 EC
5* 3.7 TE 208-230/460 14.4/10.5/5.3 60 3 EC
5* 3.7 TE 190/380-415 15.8/7.9/7.2 50 3 EC

* Soft Start    TE = Totally Enclosed    STD = Standard    EC = Extra Cost

STANDARD FEATURES

Two saw blades, operation and safety manual, safety wall poster, end cut safety pusher plate, warranty registration card.

SWITCH

Watertight magnetic with thermal overload and under voltage protection.

HEAD AND DOOR

Stainless steel.

BASE STRUCTURE

Stainless steel.

BLADE STANDARD

Hard tooth .022 inch (.5 mm) thick, three teeth per inch (8.5 mm between teeth), 5/8 inch (16 mm) wide, 124 inches (3150 mm) long (two supplied with each saw).

BLADE GUIDE

Upper and lower blade backup guides with long life carbide back-up inserts, removable as an assembly.

BLADE TENSION

Factory preset tension spring with screw handle assembly.

BLADE WHEELS

16” (40.6 cm) cast iron, chrome nickel plating, upper wheel assembly lifts out.

BEARINGS

Heavy duty tapered roller bearings used in upper wheel and lower bearing housings.

CATCH PAN

Poly, extra deep, rounded corners, pan sealed off from other parts of base, accessible through base hinged door.

CLEANING UNIT

Stainless steel body, long life carbide guide, stainless steel saw cleaners, adjustable as a unit, cleaning assembly removable for easy cleaning.

DRIVE SYSTEM

Double v-belt and pulleys with tapered roller bearings on drive shaft.

LEGS

Stainless steel legs with hex bolt levelers.

MEAT CARRIAGE

Stainless steel 8 bearing E-Z flow.

MEAT GAUGE PLATE

Stainless steel faced, adjustable from 1/16” (1.59 mm) to 6-1/2” (165 mm) locks in position, can be disengaged, entire assembly removable for cleaning.

MOTOR COMPARTMENT

Sealed off from meat contact areas, easily accessible through removable panel door.

PLATTER

All stainless steel, held in place with slide latches.

SAFETY END CUT PUSHER PLATE

Standard, removable, storage bracket provided.

OPTIONS (EC)

Power cord and plug, front stationary table extension, stationary front table in place of moving carriage, split rear platter, double flange cast iron saw blade wheels, double flange cast iron saw blade wheels with removable lower wheel, single flange stainless steel saw blade wheels, double saw guide bar.

OPTIONS (NC)

5000 feet (1524 m) per minute blade speed.

CERTIFICATION

U.S.D.A., U.L., N.S.F., C.S.A.,C.F.I.A.

WEIGHT

Uncrated: 510 lbs. (231 kg.) approximate. Crated: 583 lbs (264 kg.) approximate.

DIMS. CRATED

L = 50”(127 cm), W = 38”(96.5 cm), H = 79”(200.6 cm).

Item Number

LIT 3334SS-4003FH-301

Model 3334SS-4003FH (Fixed Head Structure) Standard Configuration
Model 3334SS-4003FH (Fixed Head Structure) Standard Configuration
3334SS-4003FH (fixed head)