Model 3334SS STD. (16”) Meat Saw

The industry standard 16” Meat Saws feature all stainless steel unitized welded enclosed base structure with aluminum head structure. A stainless steel head is available at extra cost. The 3334SS is of proven design, durable, reliable, and is applicable to all small, medium, and large supermarkets, and all small and medium plants. True blade alignment allows excellent blade tracking, giving dependable straight cutting year after year. A broad range of right hand feed and true left hand feed machines are available. There are numerous configurations and optional equipment to select from to meet your exact requirements.

SPECIFICATIONS

MODEL

3334SS STD

CONSTRUCTION

Unitized stainless steel base, tables, leg bolt levelers, carriage channel & supports. Aluminum head and door, removable.

MOTORS

HP KW TYPE VOLTS AMPS HERTZ PH STATUS
2 1.5 OP 115/208-230 28/15.5-14 60 1 STD
2 1.5 OP 208-220/440 5.9-5.6/2.8 50/60 3 STD
3 2.2 TEFC 220 12.5 50 1 EC
5 3.7 TE 208-230/460 13.6-12.3/6.2 60 3 EC
5 3.7 TE 190/380 215.2/7.6 50 3 EC
5 3.7 TE 230/460 12.9/6.45 60 3 EC
5 3.7 TE 575 5.44 60 3 EC

STD = Standard   EC = Extra Cost   OP = Open   TE = Totally Enclosed   TEFC= Totally Enclosed Fan Cooled

STANDARD EQUIPMENT

Two saw blades Operation and Safety manual Safety wall poster End cut safety pusher plate

SWITCH

General purpose w/ Thermal overload

HEAD AND DOOR

Aluminum: removable head removable door

BASE STRUCTURE

Unitized welded, Stainless steel

BLADE STANDARD

124” (3150mm) L x 5/8” (16mm) W x .022 (.56mm) thick, 3 teeth per inch, hard tooth, (two supplied with each saw)

BLADE GUIDE

Upper and lower blade backup guide assemblies with carbide long-life inserts, each removable as an assembly

BLADE TENSION

Ratchet arm and cam against pound tested spring and tension spring gauge

BLADE WHEELS

16” (40.64cm) single flange, cast iron, nickel plating, upper wheel assembly removable

BEARINGS

Heavy duty tapered roller bearings used in upper wheel hub and lower bearing housing

CATCH PAN

Poly Pan, rounded corners, sealed off from other parts of base, accessible through hinged door

CLEANING UNIT

Stainless steel body, long-life carbide guide inserts, steel saw cleaners, removable as a unit for easy cleaning (assembly also adjustable as a unit)

DRIVE SYSTEM

Non-slip silent v-belt, tension adjustable

LEGS

Stainless steel leg bolt levelers

MEAT CARRIAGE

S.S. bearings 15-1/2” (394mm) x 23-1/2” (597mm), nylon guides

MEAT GAUGE PLATE

Stainless steel faced, adjustable from 1/16” (1.6mm) to 6-1/2” (165mm), Locks in position, easy to adjust, entire assembly removable for cleaning

MOTOR COMPARTMENT

Sealed off from meat contact areas, easily accessible through removable panel door

PLATTER

Held in place with two stainless steel push-pull hold down latches

PUSHER PLATE

Safety end cut pusher plate and safety pusher plate storage hanger are supplied as standard equipment

OPTIONS (EC)

Watertight Magnetic Switch (IPOS) Stainless steel movable head and door (IPOS)  Model 44 E-Z flow S.S. carriage (IPOS)  Double saw guide bar  Stainless steel stationary bar (IPOS)  Full length S.S. front stationary table (IPOS) (see drwg. 2)  Meat gauge extended 6” (152mm) past blade IPOS) (one stabilizer required) • Cast plated single flange lower removable saw blade wheel (IPOS)  Cast plated double flange (upper & lower) saw blade wheels (IPOS), NOTE: lower saw wheel not removable  Cast plated double flange (upper & lower) removable saw blade wheels (IPOS)  S.S. single flange (upper and lower) saw blade wheels (IPOS), NOTE: lower wheel not removable  S.S. single flange (upper and lower) removable saw blade wheels (IPOS)  Front table extension 14-3/4” (375mm) x 15-3/4” (400mm)  3 wire (1 ph.) or 4 wire (3 ph.) 12 ga. Cord less plug (specify length)  Narrow blade guides (for thin blades)  Split rear stationary platter (fast blade change) (IPOS)  Standard length legs with 2-1/4” (57.2mm) disc floor pads (IPOS)  Longer S.S. hex legs to raise work surface ht. (ck w/rep.) (IPOS)  Drwg. I. Md 3334SS-TL – True left hand feed, movable S.S. head and door, less thickness gauge plate  Drwg. 2. Md 3334SS – Trim saw – right to left feed, stationary front table, optional meat gauge assembly  Drwg. 3. Md 3334SS-TL – Trim saw – True left to right feed, stationary front table, movable S.S. head and door, less meat gauge assembly • S.S.=Stainless Steel    IPOS=in place of standard    inc=includes    drwg.=drawing     ga.=gauge    EC=extra cost    NC=no charge

OPTIONS (NC)

Higher feet per minute saw blade speed (call your Representative)

CERTIFICATION

U.L. N.S.F. U.S.D.A. C.S.A. C.F.I.A.

WEIGHT

Uncrated: 464 lbs. (210 kg)    Crated: 538 lbs. (244 kg)

Item Number

LIT 3334 SERIES-339

Model 3334SS Standard
Model 3334SS Standard
Illustration A – Model 3334SS Standard Configuration
Illustration A – Model 3334SS Standard Configuration
Drawing 1 – Model 3334SS-TL True left to right feed, equipped with S.S. movable head structure. Standard size (3334SS) front moving table. Also avail. as 3334SS-4003 with S.S. movable head structure, extra large front moving carriage, 17-1/2
Drawing 1 – Model 3334SS-TL True left to right feed, equipped with S.S. movable head structure. Standard size (3334SS) front moving table. Also avail. as 3334SS-4003 with S.S. movable head structure, extra large front moving carriage, 17-1/2" (444mm) W x 38” (965mm)L. Less meat gauge plate on both models.
Drawing 2 – Model 3334SS-Trim Saw Standard right to left feed. 15-1/2”W (393mm) x 38”(960mm) Stationary front S.S. table. Also 17-1/2W (455mm) x 38” (960mm) stationary front table available for the Model 4003 and 4003FH Power Cutters. Optional meat gauge plate available for all these Models.
Drawing 2 – Model 3334SS-Trim Saw Standard right to left feed. 15-1/2”W (393mm) x 38”(960mm) Stationary front S.S. table. Also 17-1/2W (455mm) x 38” (960mm) stationary front table available for the Model 4003 and 4003FH Power Cutters. Optional meat gauge plate available for all these Models.
 Drawing 3 – Model 3334SS-TL Trim Saw True left to right feed. 15-1/2”W (393mm) x 38”(960mm) Stationary front S.S. table. Movable S.S. head and door structure less meat gauge plate assembly. Also available on the Model 3334SS-4003 true left to right feed. 17-1/2W (455mm) x 38” (960mm) stationary front table, less meat gauge plate assembly.
Drawing 3 – Model 3334SS-TL Trim Saw True left to right feed. 15-1/2”W (393mm) x 38”(960mm) Stationary front S.S. table. Movable S.S. head and door structure less meat gauge plate assembly. Also available on the Model 3334SS-4003 true left to right feed. 17-1/2W (455mm) x 38” (960mm) stationary front table, less meat gauge plate assembly.