Model 44SSFH-LP Fish Processing Band Saws

The BIRO 44SSFH-LP is a Heavy Duty, Stainless Steel, Fixed Head, Low Profile, Fish Processing Saw. See Specifications for various Models and Options available.
 

SPECIFICATIONS

Models

Model 44SSFH-LP-PGF Model 44SSFH-LP-FS-R Model 44SSFH-LP-HDFFT

 

Motors

HP KW TYPE VOLTS AMPS HERTZ PH STATUS
5 3.7 MR 208-220/440 15.7-14.8/7.9 60 3 STD
5 3.7 MR 575 5.9 60 3 EC
5 3.7 MR 220/380-415 17.8/10.3-9.4 50 3 EC

STD = Standard     EC = Extra Cost     MR = Moisture Resistant
 

Construction

Stainless steel unitized base, head and door structure; legs, channel, assembly tables; some components non S.S.

Standard Equipment

Two saw blades Operation and Safety manual Safety wall poster Safety end cut pusher plate (except fixed table saw)

Saw Blade

Model 44SSFH-LP-PGF Model 44SSFH-LP-FS-R Model 44SSFH-LP-HDFFT
135” (3429mm) L x 5/8” (16mm) W x .018 (.45mm) thick -hard tooth 135” (3429mm) L x 5/8” (16mm) W x .022 (.56mm) thick -hard tooth 135” (3429mm) L x 5/8” (16mm) W x .022 (.56mm) thick -hard tooth

 

Blade Guide

Upper and lower blade backup guide assemblies, with carbide long-life inserts, removable as an assembly

Blade Speed

Model 44SSFH-LP-PGF Model 44SSFH-LP-FS-R Model 44SSFH-LP-HDFFT
Approx. 5000 (1524m) feet per minute Approx. 4000 (1219m) feet per minute- higher f.p.m. blade speed available Approx. 4000 (1219m) feet per minute- higher f.p.m. blade speed available

Blade Wheels

18” (457mm) single flange, cast iron, nickel plating, upper wheel assembly removable – Opt. S.S. blade wheels available

Blade Guide Bars

Double (reinforced) stainless steel saw guide bars

Blade Tension

Factory preset tension spring in housing with screw tensioning handle, located under upper wheel

Blade Cleaning Unit

Stainless steel body with long-life carbide guide inserts, steel saw cleaners, removable as a unit for easy cleaning (assembly also adjusted as a unit)

Bearings

Heavy duty tapered roller bearings used in upper saw wheel hub and lower bearing housing assembly

Dust Catch Pan

Deep rounded corners poly pan sealed off from other areas of base structure, accessible through hinged door

Drive System

Tension adjustable, non-slip, silent V-belt

Meat Carriage

Model 44SSFH-LP-PGF Model 44SSFH-LP-FS-R Model 44SSFH-LP-HDFFT
25½” (647mm) L x 17½” (444mm) W stainless steel with 8, 1-7/16” diameter; (36.5mm) stainless steel EZ-flow bearings 25½” (647mm) L x 17½” (444mm) W stainless steel with 8, 1-7/16” diameter; (36.5mm) stainless steel EZ-flow bearings Not applicable

 

Legs

Stainless steel welded legs with 4 adjustable leg bolt levelers

Motor Compartment

Sealed off from meat contact areas, easily accessible through removable panel door

Platter

Model 44SSFH-LP-PGF Model 44SSFH-LP-FS-R Model 44SSFH-LP-HDFFT
Right rear platter stationary, left rear platter removable Stainless steel rear platter, removable by releasing push-pull hold down rods Stainless steel rear platter, removable by releasing push-pull hold down rods

 

Power Switch

Watertight magnetic with thermal overload and under voltage protection

Pusher Plate

Model 44SSFH-LP-PGF Model 44SSFH-LP-FS-R Model 44SSFH-LP-HDFFT
 Standard  Standard Not applicable

 

Meat Gauge Plate

Model 44SSFH-LP-PGF Model 44SSFH-LP-FS-R Model 44SSFH-LP-HDFFT
Not applicable Adjustable from 1/16” (1.6mm) to 6½” (165mm) locks in position; assembly removable for cleaning Not applicable

 

Options (Extra Charge)

Power cord (12ga.) and plug: S.S. saw blade wheels for 5/8” (16mm) saw blade, Cast saw blade wheels for 1” (25.4mm) saw blade; Longer S.S. hex (leg) bolts

Certifications

N.S.F. U.S.D.A.

Weight

Uncrated: 600 lbs. (272kg); Crated: 700 lbs (318kg); Dims. Crated: L 54” (137cm) x W 45” (114cm) x H 83” (211cm)
All weights and dimensions are approx. depending on design and options selected

Legend

FH = fixed head; FS = fish steaking; HDFFT = heavy duty fixed front table; LP = low profile; PGF = precision gauge fence; R = retailing; S.S. = stainless steel

Item Number

LIT-44SSFH-LP-375

(Design A) Model 44SSFH-LP-PGF Stainless Steel, Fixed Head, Low Profile, High Speed, Precision Gauge Fence for Frozen Fish Block Portion Control Fish Products
(Design A) Model 44SSFH-LP-PGF Stainless Steel, Fixed Head, Low Profile, High Speed, Precision Gauge Fence for Frozen Fish Block Portion Control Fish Products
Model 44SSFH-LP Fish Processing Band Saws(Design B) Model 44SSFH-LP-FS-R Stainless Steel, Fixed Head, Low Profile, High Speed Fish Steaking/Retailing
(Design B) Model 44SSFH-LP-FS-R Stainless Steel, Fixed Head, Low Profile, High Speed Fish Steaking/Retailing
Model 44SSFH-LP Fish Processing Band Saws(Design C) Model 44SSFH-LP-HDFFT Stainless Steel, Fixed Head, Low Profile, High Speed Saw, with  Heavy Duty Front Fixed Table Breaking/Trimming
(Design C) Model 44SSFH-LP-HDFFT Stainless Steel, Fixed Head, Low Profile, High Speed Saw, with Heavy Duty Front Fixed Table Breaking/Trimming
Model 44SSFH-LP Fish Processing Band SawsDrawing A
Drawing A
Drawing B
Drawing B
Drawing C
Drawing C