MODEL AFMG-48 MIXER GRINDER.

The BIRO Model AFMG-48 is a workhorse mixer grinder for the medium volume meat operation. Its 7.5  hp (5.6 kw) auger motor and size 32 head can give an output of over 65 pounds (30 kg) per minute for  the productivity you need. Separate auger and mixer motors mean there is no clutch to wear out or break, which means much lower maintenance costs and higher profits. The single reduction heavy duty roller chain auger drive with tapered roller bearings is the most efficient drive system, so you get maximum  power to the auger. The heavy duty stainless steel 200 pound (91 kg) hopper, frame, and legs can stand  up to years of daily washdown and still resist corrosion, so your mixer grinder lasts longer and you get a better return on your investment. Power, durability, and low maintenance.

SPECIFICATIONS

MODEL

AFMG-48 MIXER GRINDER.

CONSTRUCTION

HEAVY DUTY STAINLESS STEEL HOPPER, LID, PADDLE, FRAME AND LEGS. CAST IRON HOT TIN DIPPED BOWL, RING AND AUGER, SIZE 32.

MOTORS

MOTOR HP KW TYPE VOLTS AMPS CYCLE PH CODE
AUGER 7.5 5.5 TEFC 208-230/460 24-21/11 60 3 STD
MIXER 1.75 1.3 TEFC 208-230/460 5.7-5.5/2.6 60 3 STD
AUGER 10 7.5 TEFC 208-230/460 31-27/14 60 3 EC
AUGER 7.5 5.5 TEFC 575 8.8 60 3 EC
MIXER 1.75 1.3 TEFC 575 2.4 60 3 EC
AUGER 10 7.5 TEFC 575 11 60 3 EC
AUGER 7.5 5.5 TEFC 220/380-415 22/12.7-12.4 50 3 STD
MIXER 1.75 1.3 TEFC 220/380-415 5.9/3.4-3.1 50 3 STD
AUGER 10 7.5 TEFC 220/380-415 28/16.2-14 50 3 EC

TEFC= TOTALLY ENCLOSED FAN COOLED STD=STANDARD EC=EXTRA COST NC=NO CHARGE

SWITCH

WATERTIGHT MAGNETIC WITH THERMAL OVERLOAD AND UNDER VOLTAGE PROTECTION.

POWER CORD

12’ 10-4 CORD WITH PLUG 7-1/2 HP, U.S.,
12’ 10-4 CORD NO PLUG 7-1/2 HP, 50 HZ AND 575 VOLT.
12’ 8-4 CORD WITH PLUG 10 HP U.S.,
12’ 8-4 CORD NO PLUG 10 HP, 50 HZ AND 575 VOLT.

HOPPER CAPACITY

HOPPER 200 LBS. (91 KG).

GRINDING CAPACITY

OUTPUT – UP TO 65 LBS. (30 KG) PER MINUTE.

DRIVE SYSTEM

AUGER: SINGLE REDUCTION (35 PITCH – 4 ROW)
ROLLER CHAIN DRIVE WITH TAPERED ROLLER BEARINGS.
MIXER: HEAVY DUTY COMBINATION GEAR MOTOR.

SAFETY

MAGNETIC SAFETY INTERLOCK ON HOPPER LID.

STANDARD FEATURES

NO INLET (SOLID TUB) HOPPER, STAINLESS STEEL 2ND GRIND PADDLE WITH CENTER ARMS, CASTERS, SPURT GUARD, EXTRA ROD FOR FRONT, LEFT OR RIGHT SIDE OPENING LID, POWER CORD (SEE ABOVE), RING WRENCH, BOWL NUT WRENCH, TWO SHEAR PINS WITH SCREWS, RECEPTACLE FOR ELECTRIC FOOTSWITCH, OPERATING AND SAFETY MANUAL.

OPTIONS (EC)

ELECTRICAL OR PNEUMATIC FOOTSWITCH, SIZE 32 KNIVES AND PLATES, ACCESSORY CLEANING AND STORAGE RACK, EXTRA LONG STAINLESS STEEL LEGS (33”/838 MM TO 44”/1069 MM) FROM FLOOR TO BOWL CENTER, LEFT HAND 35 DEGREE SIDE  INLET, LEFT OR RIGHT 90 DEGREE STRAIGHT SIDE INLET, CONNECTIONS FOR  TANDEM OPERATIONS, 10 HP (7.5 KW) AUGER MOTOR, STAINLESS STEEL BOWL, RING  AND AUGER (ENTERPRISE OR UNGER).

OPTIONS (NC)

TUB WITH 35 DEGREE RIGHT HAND INLET (CALL FACTORY).

CERTIFICATION

U.S.D.A., U.L., N.S.F., C.S.A. ON 7-1/2 208/230/460-60-3

WEIGHT

UNCRATED: 720 LBS. (327 KG) APPROXIMATE.
CRATED: 830 LBS. (377 KG) APPROXIMATE.

DIMENSIONS CRATED

L = 52” (130 CM), W = 35” (89 CM), H = 64” (163 CM).

Item Number

LIT-AFMG48-123

MODEL AFMG-48 MIXER GRINDER.MODEL AFMG-48 MIXER GRINDER.STANDARD PADDLE
STANDARD PADDLE
OPTIONAL 1ST GRIND PADDLE
OPTIONAL 1ST GRIND PADDLE