Model AFMG-56-4 Auto Feed Mixer Grinder

Increase your production output without spending a fortune. The Biro Model AFMG-56-4 Auto Feed Mixer-Grinder, has a 400 lbs. (182 kg) product hopper capacity. The 15 HP (11.2 kW) auger motor & 5 HP (3.7 kW) mixer motor are powerful enough so they won’t bog down. The twin mixing paddles give you a thorough feed and mix. The product hopper, frame, paddles, bowl, ring, and auger are constructed of heavy duty stainless steel.

The machine has watertight controls and totally enclosed fan cooled motors so you can do a full wash-down cleanup.

As with all Biro designed and built machines, you get the benefit of engineering experience building meat processing equipment since 1921.

SPECIFICATIONS

MODEL

AFMG-56-4 AUTO FEED MIXER GRINDER.

CONSTRUCTION

HEAVY DUTY STAINLESS STEEL HOPPER, LID, PADDLES, FRAME AND LEGS. STAINLESS STEEL, SIZE 56 BOWL, RING AND AUGER.

MOTORS

MOTOR HP KW TYPE VOLTS AMPS CYCLE PH STATUS
AUGER 15 11.2 TEFC 208-230/460 39.8-36/18 60 3 STD
MIXER 5 3.7 TEFC 208-230/460 14-13/6.5 60 3 STD
AUGER 15 11.2 TEFC 200 41.4 60 3 EC
MIXER 5 3.7 TEFC 200 15.4 60 3 EC
AUGER 15 11.2 TEFC 575 14.4 60 3 EC
MIXER 5 3.7 TEFC 575 5.2 60 3 EC
AUGER 15 11.2 TEFC 220/380-415 37.1/21.5-14.7 50 3 STD
MIXER 5 3.7 TEFC 220/380-415 9.2/5.3-4.8 50 3 STD

TEFC= TOTALLY ENCLOSED FAN COOLED STD=STANDARD EC=EXTRA COST NC=NO CHARGE NA=NOT AVAILABLE

SWITCH

WATERTIGHT MAGNETIC CONTROLLER WITH THERMAL OVERLOAD AND UNDER VOLTAGE PROTECTION, SEPARATE MIX AND GRIND CONTROLS.

POWER CORD

WIRED ON THE LOW SIDE (200-230) VOLT OPERATION: 9’ (2.7 M) NO. 6 GA. WIRE CONDUCTOR POWER CORD – LESS PLUG. WIRED ON THE HIGH SIDE (380-480) VOLT OPERATION: 9’ (2.7 M) NO. 8 GA. WIRE CONDUCTOR POWER CORD – LESS PLUG. WIRED (575) VOLT OPERATION: 9’ (2.7 M) NO. 10 GA. WIRE CONDUCTOR POWER CORD – LESS PLUG.

HOPPER CAPACITY

UP TO 400 LBS. (182 KG).

GRINDING CAPACITY

UP TO APPROXIMATELY 200 LBS. (91 KG) OUTPUT PER MINUTE.

DRIVE SYSTEM

AUGER TRANSMISSION: SINGLE REDUCTION EAGLE PD (POLY), SELF CENTERING, NO STRETCH, NO LUBRICATING DRIVE BELT. MIXER TRANSMISSION: DOUBLE REDUCTION GEAR BOX W/ OPEN FACE MESHING GEAR DRIVE.

SAFETY

MAGNETIC SAFETY INTERLOCK ON HOPPER LID.

STANDARD FEATURES

FOUR 11” (28 CM) STAINLESS STEEL ADJUSTABLE LEGS WITH FOOT PADS. NOTE: IF MACHINE IS RAISED TO 8” OR MORE OF EXPOSED LEG THREADS, THE MACHINE MUST HAVE A REINFORCING CROSS LEG BRACE (#40458NE). SPURT GUARD, LID CLOSING ASSIST DAMPENERS, OPERATING AND SAFETY MANUAL.

OPTIONS (EC)

SIZE 56 KNIVES AND PLATES, FOOTSWITCH (PNEUMATIC OR ELECTRICAL), FOUR 6” (15 CM) SWIVEL CASTORS WITH SIDE LOCK ON 11” (28 CM) STAINLESS STEEL ADJUSTABLE THREADED STUDS ON CASTOR MOUNTING PADS. NOTE: IF MACHINE IS RAISED EXPOSING A MAXIMUM OF 8” (20 CM) OF LEG THREADS ABOVE CASTORS, A STAINLESS STEEL LEG REINFORCING CROSS BRACE (#40458NE) IS REQUIRED, FOUR 16” S.S. THREADED ADJUSTABLE LEGS WITH CASTOR PADS FOR OPTIONAL 6” (15 CM) DIAMETER SWIVEL CASTORS WITH SIDE LOCK (#60123NE). NOTE: OPTIONAL REINFORCING CROSS BRACE IS REQUIRED (#40458NE). CONTINUOUS FEED (GRILL STYLE) LID OPENING FRONT TO REAR ONLY, HOPPER VIEW, FOLD UP STEP ON LEFT SIDE OR RIGHT SIDE 18” (46 CM) WIDE X 19-3/4” (50 CM) DEEP.

OPTIONS (NC)

OPERATING CONTROLS LOCATED ON LEFT SIDE OF MACHINE WHEN FACING BOWL.

TANDEM OPTIONS (EC)

REQUIREMENTS FOR TANDEM OPERATION. SIZE 56 – 90° HOPPER SIDE INLET RIGHT SIDE OR LEFT SIDE, SIZE 56 TO 56 DISCHARGE HORN, INLET SEAL, CONNECTING BRACKET. SEE ABOVE OPTIONS AND TANDEM DRAWING FOR PROPER LEG, FOOT, AND CASTOR SELECTION.

WEIGHT

UNCRATED: 1760 LBS. (798 KG) APPROXIMATE. WOOD CRATED: 2060 LBS. (934 KG) APPROXIMATE.

CRATED DIMENSIONS

L = 67” (1701 mm), W = 48” (1219 mm), H = 76” (1930 mm).

Item Number

LIT-AFMG-56-4-329

Model AFMG-56-4 Auto Feed Mixer GrinderModel AFMG-56-4 Auto Feed Mixer GrinderModel AFMG-56-4 Auto Feed Mixer Grinder