MODEL 722 Manual Feed Grinder

The BIRO 722 / 822SS / 922SS Series of Manual Feed Grinders is a group of reliable, durable, and inexpensive service grinders designed for restaurants, meat departments, and hunters. All of these grinders have specially constructed motors, which gives you all of the power and output you need in a grinder. All models are equipped with a single reduction HTD (high torque drive) belt system that provides maximum power without slippage for greater productivity. The bowl assembly and feed tray on each of the models can be removed without tools. Their simple, rugged construction gives you a grinder that is easy to clean and virtually maintenance free. With a 22 head size and straight or flared throat, you can choose the grinder that’s right for you. Reliability, durability, and low maintenance – BIRO Service Grinders.

SPECIFICATIONS

MODEL

722 Manual Feed Grinder

MOTOR

STATUS HP (KW) VOLTAGE CYCLE PHASE AMPS
STD 3/4 (.56KW) TE 115/208-230 60 1 7/3.7-3.5
OPT 3/4 (.56KW) TE 220 50 1 4.3

TE=TOTALLY ENCLOSED   OP=OPEN   EC=EXTRA COST   STD=STANDARD   OPT=OPTIONAL

CONSTRUCTION:

Cast aluminum base

FEED PAN:

Removable stainless steel feed pans standard.

FEED PAN CAPACITY:

Holds approximately 20 LBS. (9.1 KG)

BOWL, CAST IRON

Tinned, straight sides

BEARINGS ON DRIVE SHAFT

Heavy duty thrust and radial – prelubricated

DRIVE SYSTEM

HTD (high-torque drive) steel wire power grip belt, 95% efficiency rated, non corrosive, no lubrication required

GRIND CAPACITY OUTPUT

All capacities are approximate through 1/8” hole plate and depend on product type, temperature, size, plate hole size, and feed rate

LBS/KGS PER MINUTE

10-16 lbs. (4.5-7.3 kgs)

STANDARD FEATURES

Stomper, operating and safety manual,

6 foot cord and plug all single phase.

6 foot cord less plug all three phase.

SIZE 22 KNIFE/PLATE

Required, extra cost. Various plate hole sizes available to fit your specific application.

CERTIFICATIONS

NSF UL

WEIGHTS: NET

88 lbs. (39.9 kg)

WEIGHTS: GROSS

112 lbs. (50.8 kg)

DIMENSIONS CRATED:

L = 18” x W = 31” x H = 27”    457 mm x 787 mm x 686 mm

Item Number

LIT-22-22-22-218

722
722
Model 722
Model 722
3/8” (9.5 mm)
3/8” (9.5 mm)
1/8” (3.2 mm)
1/8” (3.2 mm)
<strong>Extra Cost</strong>, size 22 knife and plate. Plate hole sizes available listed below.
Extra Cost, size 22 knife and plate. Plate hole sizes available listed below.
MODEL 722 Manual Feed Grinder