The BIRO Semi-Automatic Slicers are designed to provide trouble free service in a wet meat room environment. Features such as Water Resistant Motors, Electrical Components and Connections, plus Non Corrosive Metals all add to the water protection benefits of the slicer.

The new B350Comfort utilizes a single speed motor capable of slicing up to 40 slices per minute with a full stroke of the carriage. It also is equipped with a disengagement lever to easily switch from automatic to manual operation.

The 13¾” (350mm) Dia. blade, common to both machines, is a Hollow Ground Alloy Steel blade. It is designed with a special step face to relieve surface friction on the products that allows for a slicing capacity of 9¼” (235mm) on round products. The thickness control allows for cuts from 0-1” (25mm) with indicator positions shown on the index knob in 1 mm increments, providing precise slice consistency.

Minimal number of removable parts allow for easy clean up while the ergonomic and easy glide carriage allows little resistance during manual slicing.

Built in safety features include: Blade protective ring guard, which prevents exposing the blade’s edge when the blade cover is removed for cleaning. When the table is locked open for cleaning it prevents the thickness gauge from being opened exposing the blade edge. The remote sharpener mounts easily when needed, but is stored away from the slicer when not in use, providing added hygiene security to the slicing operation.



B350Comfort Semi-Automatic single speed slicer


Body – Anodized polished aluminum cast with non-corrosive metal frame


IP65 ½ HP (.37kW) 115V 60hz 1ph, Internally Cooled, Water Resistant (standard, U.S. voltage), IP65 ½ HP (.37kW) 220V 60hz 1ph, Internally Cooled, Water Resistant, IP65 ½ HP (.37kW) 220V 50hz 1ph, Internally Cooled, Water Resistant


Blade 13¾” (350mm) Hollow ground alloy steel (240 rpm)  Slice thickness adjustable 0-1” (0-25mm)  Maximum product cut, Round 9¼” (235mm)  Maximum product cut, Square 7 7/8 x 7 7/8”  (200mm x 200mm)  Maximum product cut, Rectangle 11¾ x 6” (298mm x 152mm)  Automatic spring loaded drive belt tensioning • Blade protective ring guard prevents exposed blade edge during cleaning  Tilt-away product table lockout prevents thickness gauge from opening during cleaning  Thermal overload/no volt release prevents accidental turn on after power outages  Poly groove belt drive providing optimum performance  Water resistant IP65 motor, wiring harness and electronic controls  Product fence-for use on narrow products  Stainless steel product end weight  Machine lift handle to allow cleaning table under machine  6 ½’ cord, 3 prong plug on 115V – 60  6 ½’ cord, less plug on 220V  Detachable sharpener.


Single speed at 40 strokes/min, Full length stroke only, Green start touch-button with green/blue indicator light, red stop touch-button


NSF8-2010, ETL, CE


*D 31 ⅜”(797mm) x W 24”(610mm) x H 28¼”(718mm) Foot to Foot (centerline) D 21¼”(540mm) x W 15 ½”(394mm)

Note: * is the depth w/ full travel of meat carriage


Wood Crated: 160 lbs (72.6kg) Approx.


Wood Crated: 33”(838mm) x 30”(762mm) x 33”(838mm) Approx.

Item Number


Model B350Comfort SEMI-AUTOMATIC SLICERB350Comfort